Comparing batteries by their amp-hour rating is the most common mistake in this entire category, because the figure on the label is not the figure you get to use.
Depth of discharge is the number that matters
Every battery has a limit on how far you should drain it before you start shortening its life. That limit is called depth of discharge, and it varies enormously by chemistry.
Zing's LiFePO4 batteries are rated for 90% depth of discharge. On a 51.2V 200Ah battery with 10.24kWh of rated energy, that means you can genuinely plan around most of it.
Lead-acid batteries are conventionally kept to around half their rated capacity to avoid premature wear. So two batteries with the same number printed on the side can deliver very different amounts of usable energy.
The practical consequence: compare usable kilowatt-hours, not the label.
Cycle life is the second number
A cycle is one discharge and recharge. Cycle life tells you roughly how many of those the battery will do before its capacity falls away.
Zing's LiFePO4 range is rated at 6,000+ cycles, and the 51.2V 314Ah model at 8,000+ cycles, with a 5-year warranty.
If you are discharging roughly once a day, the difference between a battery rated for a few hundred cycles and one rated for several thousand is the difference between replacing it in a couple of years and not thinking about it for a long time.
This is why the cheaper battery is often the more expensive decision. The question is not what it costs today, it is what it costs per usable kilowatt-hour across its life.
Working out what you actually get
Capacity in kilowatt-hours is volts multiplied by amp-hours. Across the Zing 51.2V range:
- 100Ah - 5.12kWh rated
- 200Ah - 10.24kWh rated
- 300Ah - 15.36kWh rated
- 400Ah - 20.48kWh rated
- 600Ah - 30.72kWh rated
The 314Ah model publishes both figures, which is the clearest way to see the distinction: 16.07kWh rated energy, 14.47kWh usable.
The practical differences
- Weight and size - LiFePO4 packs more energy into less space and weight, which matters if it is going on a wall.
- Maintenance - no topping up with water, no equalisation charging.
- Monitoring - Zing's batteries carry RS232, RS485 and CAN communication, and several models add Bluetooth and Wi-Fi app monitoring, so you can see state of charge rather than guess at it.
- Expandability - the 51.2V models support up to 15 units in parallel, so you can start smaller and grow the bank later rather than buying everything at once.
Is lead-acid ever the right answer?
It can be, and it is worth saying so plainly. If the budget is fixed and small, if the battery will be cycled rarely rather than daily, or if you are replacing one unit in an existing lead-acid bank, it may still make sense.
Zing's hybrid inverters support both chemistries on a 40-60V battery range, so the inverter does not force the decision.
Matching the battery to your inverter
Check the battery voltage against what your inverter expects. Zing's hybrid inverters run a 40-60V bank, which is what the 51.2V low voltage range is built for.
High voltage batteries are a different system entirely and need an inverter designed for a high voltage DC bus - see the high voltage range if that is what you are specifying.
Not sure which bank suits your setup? Ask us before you order.
